Little Architects

For Little Architects we were invited to make them some custom hardware and a couple of workbenches for their common area.

We worked with P3Dcreations to make the hardware. They machined all the brass and steel for us and we then attached and hand polished the drawer pulls. We also sealed them so they would not tarnish.

For the workbenches, we worked with Mojo Metalworks for the steel frames. We built the wooden surfaces with American ash. There were a series of brass inserts that we installed onto the surfaces.

The most interesting part of the project was taking these up eight stories up to their offices. 

Photography by John Courtney.